SUPPORTED SAMPLE RATES
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
MICROPHONE INPUTS
Frequency Response 20Hz - 20kHz ± 0.1dB
Dynamic Range 111dB (A-weighted)
THD+N<0.0012% Noise EIN-128dBu (A-weighted)
Maximum Input Level 9dBu (at minimum gain)
Gain Range 56dB
Impedance 3kΩ
LINE INPUTS
Frequency Response 20Hz - 20kHz ± 0.1dB
Dynamic Range 110.5dB (A-weighted)
THD+N <0.002%
Maximum Input Level 22dBu (at minimum gain)
Gain Range 56dB
Impedance 60kΩ
INSTRUMENT INPUTS
Frequency Response 20Hz - 20kHz ± 0.1dB
Dynamic Range 110dB (A-weighted)
THD+N <0.03%
Maximum Input Level 12.5dBu (at minimum gain)
Gain Range 56dB
Impedance 1.5MΩ
LINE/MONITOR OUTPUTS
Dynamic Range (Line Outputs)108dB
THD+N <0.002%
Maximum Output Level (0 dBFS) 15.5dBu
Impedance 430Ω
HEADPHONE OUTPUTS
Dynamic Range 104dB (A-weighted)
THD+N <0.002%
Maximum Output Level 7dBu
Impedance<1Ω
Specification
Hire
Focusrite 2i2 Gen2

Options
Description
The Scarlett 2i2 hardware interface provides the means for connecting microphones, musical instruments or line level audio signals to a computer running Mac OS or Windows. The signals at the physical inputs can be routed to your audio recording software / digital audio workstation; similarly, the DAW’s monitor or recorded output will appear at the unit’s physical outputs.
Audio sources – mics, instruments, etc. - connected to the physical inputs can be recorded in the DAW and then routed from your DAW to the physical outputs. The physical outputs can be connected to an amplifier and speakers, powered monitors, headphones, analogue mixer or any other analogue audio equipment that you wish to use. Although all inputs and outputs on the Scarlett 2i2 are routed directly to and from your DAW for recording and playback, you can configure the routing within your DAW in order to meet your needs.