Maximum Output Power
2 Ω per channel, stereo: 800 W
4 Ω per channel, stereo: 1200 W
8 Ω per channel, stereo: 600 W
Controls
Front: Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel)
System
Number of channels: 2
Output voltage: 100 V peak / 70 Vrms / 39.2 dBu
Input sensitivity for maximum output voltage: 6 dBu
Output current: 20 Arms
Output circuit type: Class-D
THD+N< 0.1%, 20 Hz - 20 kHz @ 1 W
< 0.05% @ 1 kHz, 1 dB below clip
Output noise: -65 dBu, A-weighted
Signal-to-noise: > 104 dB
Channel crosstalk: > 80dB @ 1 kHz
Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 dB
Common mode rejection (CMR): > 50 dB
Gain (all DSP controls set to 0 dB): 33 dB
Indicators
Power: Red LED
Limit, per channel: Red LED
Signal / mute, per channel: Green/Red LED
Specification
Hire
Lab Gruppen IPX2400

Options
Description
High power density, competitive cost and power consumption efficiency make the IPX 2400 the ideal compact yet powerful amp solution whether it’s for permanent installations, portable corporate AV systems, or live PA setups.
Delivering 2 x 1200 W at 4 ohms, the IPX 2400 packs reliable power and performance into a single rack space. But raw muscle power is not enough. At the heart of the IPX platform, you’ll find a cutting-edge DSP engine equipped with up to 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay – and both high- and low-pass filters adjustable to any frequency. The DSP also provides extensive protection for your loudspeaker system in the form of the innovative software-controlled Speaker Protect Limiter. You can configure this with ease from within the IPX Controller software.
You can access all setup parameters for input mixing, DSP features and limiter settings on the front panel, using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available and up to 100 user-defined presets may be stored onboard.
SpeakON Lab Split