top of page

01296 846982

  • Facebook
  • Instagram


  • Sampling frequency rate  -  External:  44.1kHz or 48kHz

  • Total harmonic distortion:  Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz

  • Frequency Response:  +0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz

  • Dynamic Range:  108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter

  • Crosstalk:  -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz

  • Heat dissipation:  100-240V, 50/60Hz, 43.5kcal/h

  • Power requirements:  100-240V, 50/60Hz

  • Power consumption:  50W

Hum & Noise Level

  • Equivalent input noise:  -128dBu, Gain=+66dB *Measured with A-weighting filter

  • Residual output noise:  -88dBu, ST master off *Measured with A-weighting filter

Physical & Dimensions

  • W:  480mm (18-7/8")

  • H:  88mm (3-4/8")

  • D:  364mm (14-3/8")

  • Net weight:  5.7kg (12.6lbs)

  • Others:  Temperature Range: Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C



Yamaha TIO1608-D



The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. Tio racks can be connected using up to three units with a fast and easy setup.

bottom of page